General Safety

General safety products address common workplace risks that may not fall within a single specialised PPE category. They support safer movement, protection of equipment and infrastructure, control of incidental spills, emergency visibility, and isolation of hazardous energy during maintenance. Their value depends on correct selection, installation, inspection, and integration into the site’s safety procedures. A product should be matched to the specific hazard and operating environment rather than treated as a universal solution.

Slip-prevention products can improve traction on selected walking surfaces, steps, ramps, or access routes. Their effectiveness depends on surface preparation, adhesion, texture, contamination, wear, cleaning, and the type of footwear used. Impact-protection components can reduce damage to corners, walls, edges, pipes, and other vulnerable structures, but they must be sized and installed for the likely contact forces and location. They should not obstruct emergency routes, create trip hazards, or interfere with inspection and maintenance.

Spill-control solutions are used to contain, absorb, or manage accidental releases of liquids. Selection depends on the chemical involved, spill volume, compatibility of absorbent materials, required containment capacity, drainage layout, and disposal requirements. A product suitable for oil may not be suitable for corrosive chemicals or other hazardous substances. Secondary containment for containers should be assessed for capacity, material compatibility, outdoor exposure, and the possibility of rainwater accumulation or overflow. Spill equipment does not replace leak prevention, closed transfer systems, or an established response plan.